Go Bust MIC

Go MICBUSTERS

MICBUSTERS · Technology explained · 1 / 5

Retego Labs SRB Testing: Technology, Results and MIC Interpretation

A rapid result is valuable when it changes a field decision. Retego Labs’ sulfate-reducing bacteria (SRB) method combines biochemical signals; targeted quantitative PCR (qPCR) measures selected DNA sequences. That difference determines how much each result can tell you in an investigation of microbiologically influenced corrosion (MIC).

Evidence checked: 26 October 2026 · By MICBUSTERS · Retego technology series

Direct answer

Retego’s SRB test is an enzyme-based, two-signal water assay: a fluorescence response and an H₂S response are interpreted together. The 2026 conference paper also describes a separate, faster assay for total bacterial loading. Neither result directly measures corrosion. Targeted qPCR adds the ability to identify and quantify selected microbial groups and functional genes.

Discuss on-site qPCR for your samples →

Which Retego technology are we discussing?

“Retego technology” can refer to an optical reader, a particular chemical assay or a microbial test. Those are different parts of a measurement system. Retego’s TTR documentation describes a portable reader using several optical measurements. A reader can measure a chemical response without identifying the biological process that produced it. [2]

Keep the instrument, total-bacteria assay and SRB assay separate
Technology or assayWhat is measured?What can the result support?
Optical water-analysis platformChanges in optical properties from a selected reagent reaction.Assay-specific water chemistry information. A chemistry measurement is not automatically a microbial count.
Total-bacteria assay in the 2026 paperA bacterial enzyme-related signal, normalised for test conditions.A broad bacterial-loading estimate and operational trend.
Retego SRB assay in the 2026 paperAn enzyme-related fluorescence response plus a separate H₂S response.An SRB indication under the assay’s conditions and interpretation rules.

The paper reports a typical analysis time of about 30 minutes for its total-bacteria assay, while the SRB method allows observations over a period extending to 24 hours. These timings belong to different assays. A water-chemistry result delivered in minutes should not be advertised as an SRB result delivered in minutes. [1]

How does an enzyme-based bacterial assay work?

An enzyme is a biological catalyst. In this type of test, enzymes in a sample react with a supplied substrate and generate a measurable colour or fluorescence response. Within a validated operating range, a larger response can be associated with more enzyme activity. Calibration is then used to relate that response to an operational bacterial-loading estimate.

The total-bacteria method in the paper filters a known sample volume and adjusts its reading for a blank, exposure time, temperature and filtered volume. It then applies a proprietary conversion to report bacterial equivalents or serial-dilution equivalents. This makes the output useful for trending, but it does not turn the assay into a direct microscopic count or a plate-count experiment. [1]

The distinction matters after a treatment change: a lower signal may reflect fewer cells, lower enzyme activity per cell, inhibition of the reaction, or a combination. A result needs the same sampling and analytical conditions before it can be interpreted as a biological trend.

How does the Retego SRB test work?

The SRB method described by Confer and colleagues uses two responses. One cuvette develops a fluorescence response, assessed under a handheld light source. A separate cuvette indicates H₂S. The method requires both responses to meet their comparison criteria before it classifies the sample as SRB-positive. An oxygen scavenger helps create suitable conditions for the reaction. [1]

  1. Introduce the water sample. Use the specified assay cuvettes and sample volume.
  2. Observe the biochemical responses. Follow the prescribed observation times and comparison standards.
  3. Apply the combined interpretation. A single response is not the complete SRB result.

Earlier signal development can be associated with a higher estimated population. That is a calibrated time-to-response relationship, not a universal biological clock. Sample chemistry, physiological state and the observation schedule still matter. The manufacturer currently describes the commercial method as a 1–24-hour assay. [3]

Need to distinguish an SRB indication from a targeted qPCR result? Discuss your samples →

What does a positive Retego SRB result mean for MIC?

A positive result is evidence that the sample met the test’s combined biochemical criteria. It supports investigation of sulfide-producing microbial activity. It does not establish which species caused the response, which corrosion-associated genes were present, or whether a particular metal surface is losing material.

This is where targeted qPCR provides more decision-specific information. Instead of inferring a group from a combined chemical response, a validated qPCR assay detects a defined DNA sequence. A monitoring panel can distinguish selected sulfate-reduction targets, methanogenic targets and narrower corrosion-associated biomarkers. The answer is bounded by the coverage of the actual primers and probes.

For example, the published micC assay targets a cytochrome-associated gene found in selected severely corrosive sulfate-reducing biofilms. It therefore asks a narrower question than “is there an SRB-like response?” It remains a DNA marker: detection does not demonstrate current electron transfer or a corrosion rate. [4]

Practical interpretation: an enzyme-based SRB result can justify a closer look. A targeted qPCR panel helps define which biological evidence to look for. Both need to be connected to sampling location, water chemistry and material condition.

Can a negative water result exclude MIC?

No. A negative result applies to the tested aliquot, the method’s reporting criteria and the conditions of the test. It cannot describe every surface, deposit or dead leg in an installation. A water sample can miss a localised biofilm even when the analytical method works correctly.

The same sampling limitation applies to qPCR. Its advantage is not that it makes sampling irrelevant; it is that a suitable sample can be examined for several defined microbial targets. Read why a produced-water sample cannot independently confirm or exclude MIC.

Where does on-site qPCR offer the stronger primary method?

Use targeted qPCR as the primary microbiological method when your investigation depends on distinguishing microbial groups, following selected functional genes, or comparing water with surface-associated material. Use a rapid enzyme screen when its biochemical endpoint answers the immediate operational question.

MICBUSTERS provides an on-site qPCR workflow that typically returns results in approximately two hours, depending on preparation, targets and controls. This is a same-visit option, rather than a requirement to ship every sample to a laboratory. The fastest positive enzyme result may still arrive sooner; the reason to choose qPCR is the biological detail it adds.

Retego’s 2022 residential water announcement provides background on its water-testing business. It is not validation of the oilfield SRB assay or evidence of superiority over qPCR. For that question, the assay-specific technical evidence is the relevant starting point. [5]

Your samples. Your decision.

Find the right test for your MIC question

Comparing a rapid SRB test with on-site qPCR? Start a conversation about the sample you can collect and the decision you need to make.

  1. Leave your work email.
  2. We follow up about your system, sample and monitoring question.
  3. Discuss whether on-site qPCR is a useful next step.

Discuss my MIC samples

Your email lets us reply to this enquiry. Read our privacy policy.

Prefer to explain your question now? Use the contact page.

Frequently asked questions

Is Retego SRB testing a PCR method?

No. The SRB method described in the 2026 paper uses biochemical responses, including fluorescence and H₂S detection. It does not amplify a selected DNA target.

Does the total-bacteria enzyme assay identify SRB?

The total-bacteria assay gives a broad loading estimate. The paper describes a separate combined assay to obtain an SRB indication.

Does a positive SRB result prove active MIC?

No. Microbiological evidence must be assessed alongside surface condition, chemistry, operating history and corrosion measurements.

Privacy Overview
Logo

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful. For more information visit our Privacy Policy page.

Necessary Cookies

Necessary Cookie required the page to work properly and save your preferences for cookie settings.

3rd Party Cookies

This website uses Google Analytics to collect anonymous information such as the number of visitors to the site, and the most popular pages.

Keeping this cookie enabled helps us to improve our website.